home
StrataCafe Forums
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 StrataCafe
 Strata Design 3D CX
 Object Size is wrong
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

studio309
A Regular

USA
151 Posts

Posted - 04/10/2019 :  11:08:46  Show Profile  Visit studio309's Homepage  Reply with Quote
So, I have 2 bottles in a scene (refer to the measured bottles in the photo). One is much larger than the other, but they both measure 60mm in diameter, in the Object Properties palette. The matching measurements are with the objects NOT grouped, and not subdivided. The largest bottle is the (visual) size it should be, relative to the object on the right. The other 3 bottles in the scene are much too small, even though their measurements say otherwise. What am I missing?

Image Insert:

146.06 KB

Jerry Russell
STUDIO 309
www.jerryrussell.com

Kevco
Admin

466 Posts

Posted - 04/10/2019 :  11:12:15  Show Profile  Reply with Quote
We'll need the model file to be able to look into this. You can send it to support at strata dot com.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
StrataCafe Forums © 2009 StrataCafe Go To Top Of Page
Snitz Forums 2000